GTL2002D集成電路（IC）的轉換器電平移位器規(guī)格書PDF中文資料

General description

The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The device allows bidirectional voltage translations between 1.0 V and 5.0 V without use of a direction pin.

Features and benefits

■ 2-bit bidirectional low voltage translator

■ Allows voltage level translation between 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5 V buses, which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels

■ Provides bidirectional voltage translation with no direction pin

■ Low 6.5 ? ON-state resistance (Ron) between input and output pins (Sn/Dn)

■ Supports hot insertion

■ No power supply required; will not latch up

■ 5 V tolerant inputs

■ Low standby current

■ Flow-through pinout for ease of printed-circuit board trace routing

■ ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101

■ Packages offered: SO8, TSSOP8 (MSOP8), VSSOP8, XQFN8

Applications

■ Any application that requires bidirectional or unidirectional voltage level translation from any voltage between 1.0 V and 5.0 V to any voltage between 1.0 V and 5.0 V

■ The open-drain construction with no direction pin is ideal for bidirectional low voltage (e.g., 1.0 V, 1.2 V, 1.5 V, or 1.8 V) processor I2C-bus port translation to the normal 3.3 V or 5.0 V I2C-bus signal levels or GTL/GTL+ translation to LVTTL/TTL signal levels.