FDA803U-KBX中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

Features

? AEC-Q100 qualified

? Integrated 108 dB D/A conversion

? I2S and TDM digital input (4/8/16CH TDM)

? Input sampling frequency: 44.1 kHz, 48 kHz,

96 kHz, 192 kHz

? Full I2C bus driving (3.3/1.8 V)

? CISPR 25 - Class V (Fourth edition)

? Very low quiescent current

? Output lowpass filter included in the feedback

allowing outstanding audio performances

? Wide operating supply range from 3.3 to 18 V,

suitable for car radio, telematics and e-call

? MOSFET power outputs allowing high output

power capability

– 1 x 25 W /4 Ω @ 14.4 V, 1 kHz THD = 1

– 1 x 30 W /4 Ω @ 14.4 V, 1 kHz THD = 10

? 2 Ω loads driving

? Power limiting function (configurable through I2C)

? I2C bus diagnostics:

– Short to VCC/GND

– Short load and open load detection (also in

play mode)

– Four thermal warnings

? DC offset detector (also in play) and 'hot spot'

detection

? Clipping detector

? Integrated thermal protection

? Legacy mode ('no I2C' mode), 4 configurable

settings

? Short circuit and ESD integrated protections

? Package: PowerSSO-36 exposed pad up

Description

The FDA803U is a single bridge class D amplifier, designed in the most advanced BCD technology, intended for any automotive audio application (car radio, telematics and e-call, noise and tone generators, etc).

The FDA803U integrates a high performance D/A converter together with powerful MOSFET outputs in class D, so it is very compact and powerful, moreover it reaches outstanding efficiency performances (90).

It has a very wide operating range: it can be operated both with standard car battery levels (5.5-18 V operating, compatible to load dump pulse) and with external step-down generated voltages or emergency battery (since it is compatible to minimum 3.3 V operative).

The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion.

FDA803U is configurable through I2C bus interface and integrates a complete diagnostics array specially intended for automotive applications including innovative open load and DC offset detection in play mode.

Thanks to the solutions implemented to solve the EMI problems, the device is intended to be used in the standard single DIN car-radio box together with the tuner.

Moreover FDA803U features a configurable power limiting function, and can be optionally operated under no I2C mode ('legacy mode').