FAN5032MPX集成電路（IC）的特殊用途穩(wěn)壓器規(guī)格書(shū)PDF中文資料

Description

The FAN5032 is a controller for a multi-phase buck switching regulator optimized to convert a 12V input supply to the processor core voltage required by high-performance Intel processors. It has an internal 8-bit digital to analog converter (DAC) that converts a digital voltage identification (VID) code, sent from the processor to set the output voltage between 0.5V and 1.6V in 6.25mV steps. It outputs a pulse-width modulated (PWM) signal to external MOSFET drivers that, in turn, drive the switching power MOSFETs. The switching frequency of the design is programmable by a single resistor value and the number of phases can be programmed to support 2, 3, or 4 phase applications.

Features

■ Selectable 2, 3, or 4 phase operation at up to 1MHz per phase

■ ±7.7mV worst-case differential sensing error over temperature

■ Active current balancing between the output phases

■ Power good and crowbar blanking supports on-the-fly VID code changes

■ 0.5V to 1.6V output

■ Fully compliant to Intel? VR10 and VR11 specifications

■ Selectable VR10 extended (7 bit) and VR11 (8 bit) VID tables

■ Programmable soft-start ramp

■ Programmable short-circuit protection and latch-off delay

Special Features

■ 300mV OVP and crowbar threshold

Applications

■ Desktop PC/server processor power supplies for existing and next-generation Intel processors

■ VRM modules