EVAL-ADPDUCZ開發板套件編程器的評估演示板及套件規格書PDF中文資料

EVAL-ADPDUCZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADPDUCZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADPD4200 operates as a complete multimodal sensor front

end, stimulating up to four light emitting diodes (LEDs) and measuring

the return signal on up to four separate current inputs. Twelve

time slots are available, enabling 12 separate measurements per

sampling period.

The data output and functional configuration utilize a serial port

interface (SPI) on the ADPD4200. The control circuitry includes

flexible LED signaling and synchronous detection. The device uses

a 1.8 V analog core and 1.8 V or 3.3 V compatible digital input/output

(I/O).

The analog front end (AFE) rejects signal offsets and corruption

from asynchronous modulated interference, typically from ambient

light, eliminating the need for optical filters or externally controlled

dc cancellation circuitry. Multiple operating modes are provided,

enabling the ADPD4200 to be a sensor hub for synchronous

measurements of photodiodes, biopotential electrodes, resistance,

capacitance, and temperature sensors.

The ADPD4200 is available in a 2.619 mm × 1.804 mm, 0.40 mm

pitch, 24-ball WLCSP.

Analog Devices is in the process of updating documentation to

provide terminology and language that is culturally appropriate. This

is a process with a wide scope and will be phased in as quickly as

possible. Thank you for your patience.

FEATURES

? Multimodal analog front end

? 4 input channels with multiple operation modes to accommodate

the following measurements: PPG, ECG, EDA, impedance, and temperature

? Dual-channel processing with simultaneous sampling

? 12 programmable time slots for synchronized sensor measurements

? Flexible input multiplexing to support differential and singleended

sensor measurements

? 4 LED drivers, which can be driven simultaneously

? Flexible sampling rate from 0.004 Hz to 9 kHz using internal oscillators

? On-chip digital filtering

? SNR: 105 dB (100 kΩ TIA gain, 100 Hz ODR, 80 pulses, CPD =

70 pF, 0.5 Hz to 10 Hz bandwidth)

? AC ambient light rejection: 60 dB up to 1 kHz

? 400 mA total LED peak drive current

? Total system power dissipation: 30 μW (combined LED and AFE

power), continuous PPG measurement at 75 dB SNR, 25 Hz

ODR, 100 nA/mA CTR

? SPI communications supported

? 512-byte FIFO size

APPLICATIONS

? Wearable health and fitness monitors: heart rate monitors

(HRMs), heart rate variability (HRV), stress, blood pressure estimation,

SpO2, hydration, and body composition

? Industrial monitoring: CO, CO2, smoke, and aerosol detection

? Home patient monitoring