EVAL-ADG1634LEBZ開發板套件編程器的評估演示板及套件規格書PDF中文資料

EVAL-ADG1634LEBZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADG1634LEBZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The EVAL-ADG1634LEBZ is the evaluation board for the

ADG1634L. The ADG1634L contains four independent single-pole,

double-throw (SPDT) switches. Each switch conducts equally well

in both directions when on, and each switch has an input signal

range that extends to the supplies. In the off condition, signal levels

up to the supplies are blocked.

An external VL supply pin provides logic control flexibility for lower

logic controls. The ADG1634L is both 1.2 V and 1.8 V JEDEC

standard compliant.

Figure 1 shows the EVAL-ADG1634LEBZ in a typical evaluation

setup. The EVAL-ADG1634LEBZ is located in the center of the

evaluation board. Eight test points are included to connect to each

of the source pins. Subminiature Version B (SMB) sockets are

included for the drain inputs. Three screw terminals power the

device. A 5-pin header is provided for user defined digital voltage, if

required.

Full specifications on the ADG1634L are available in the

ADG1634L data sheet available from Analog Devices, Inc., and

should be consulted in conjunction with this user guide when using

the EVAL-ADG1634LEBZ.

FEATURES

? Single inline headers provide flexibility for the field programmable

gate array (FPGA) or microcontroller 1.2 V or 1.8V logic input

signals

? SMD pin resistor or capacitor sockets available for the addition of

passive components

? SMB connector sockets provide flexibility for the input and output

signals

EVALUATION KIT CONTENTS

? EVAL-ADG1634LEBZ evaluation board

DOCUMENTS NEEDED

? ADG1634L data sheet

? EVAL-ADG1634LEBZ user guide

EQUIPMENT NEEDED

? DC voltage source (VDD/VSS)

? ±5 V for dual supply

? Optional digital logic supply (VL)

? 1.1 V to 1.3 V for 1.2 V logic

? 1.65 V to 1.95 V for 1.8 V logic

? Analog signal source

? Method to measure voltage, such as a digital multimeter (DMM)