DS21348集成電路（IC）的電信規(guī)格書(shū)PDF中文資料

DESCRIPTION

The DS21348 is a complete selectable E1 or T1 LIU for short-haul and long-haul applications. Throughout the data sheet, J1 is represented wherever T1 exists. Receive sensitivity adjusts automatically to the incoming signal and can be programmed for 0dB to 12 dB or 0dB to 43dB for E1 applications and 0dB to 30dB or 0dB to 36dB for T1 applications.

FEATURES

Complete E1, T1, or J1 line interface unit(LIU)

Supports both long-haul and short-haul trunks

Internal software-selectable receive-side termination for 75?/100?/120

3.3V power supply

32-bit or 128-bit crystal-less jitter attenuator requires only a 2.048MHz master clock for both E1 and T1 with option to use 1.544MHz for T1

Generates the appropriate line build-outs, with and without return loss, for E1 and DSX-1 and CSU line build-outs for T1

AMI, HDB3, and B8ZS, encoding/decoding

16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz clock output synthesized to recovered clock

Programmable monitor mode for receiver

Loopbacks and PRBS pattern generation/detection with output for received errors

Generates/detects in-band loop codes, 1 to 16 bits including CSU loop codes

8-bit parallel or serial interface with optional hardware mode

Muxed and nonmuxed parallel bus supports Intel or Motorola

Detects/generates blue (AIS) alarms

NRZ/bipolar interface for TX/RX data I/O

Transmit open-circuit detection

Receive Carrier Loss (RCL) indication (G.775)

High-Z State for TTIP and TRING

50mA (rms) current limiter