General Description

The DS1856 dual, temperature-controlled, nonvolatile (NV) variable resistors with three monitors consists of two 256-position, linear, variable resistors; three analog monitor inputs (MON1, MON2, MON3); and a direct-to digital temperature sensor. The device provides an ideal method for setting and temperature-compensating bias voltages and currents in control applications using

minimal circuitry. The variable resistor settings are stored in EEPROM memory and can be accessed over the 2-wire serial bus.

Features

?SFF-8472 Compatible

?Five Monitored Channels (Temperature, VCC, MON1, MON2, MON3)

?Three External Analog Inputs (MON1, MON2, MON3) That Support Internal and External Calibration

?Scalable Dynamic Range for External Analog Inputs

?Internal Direct-to-Digital Temperature Sensor

?Alarm and Warning Flags for All Monitored Channels

?Two Linear, 256-Position, Nonvolatile Temperature Controlled Variable Resistors

?Resistor Settings Changeable Every 2°C

?Three Levels of Security

?Access to Monitoring and ID Information Configurable with Separate Device Addresses

?2-Wire Serial Interface

?Two Buffers with TTL/CMOS-Compatible Inputs and Open-Drain Outputs

?Operates from a 3.3V or 5V Supply

?-40°C to +95°C Operating Temperature Range