DC2995A開發板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS規格書PDF中文資料

DC2995A屬于開發板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS。由亞德諾半導體技術有限公司制造生產的DC2995A評估板 - DC/DC 與 AC/DC（離線）SMPS該系列產品提供了一種方便的方法，可對開關模式電源轉換所用的器件（包括 DC-DC 和 AC-DC 型）進行性能或特性評估?！胺€(wěn)壓器”（包含內部電源開關裝置）和“控制器”（設計為控制外部電源開關）之類的器件均包括在內。

GENERAL DESCRIPTION

The LTC7891 is a high performance, step-down, dc-to-dc switching

regulator controller that drives all N-channel synchronous gallium

nitride (GaN) field effect transistor (FET) power stages from input

voltages up to 100 V. The LTC7891 solves many of the challenges

traditionally faced when using GaN FETs. The LTC7891 simplifies

the application design while requiring no protection diodes and no

other additional external components compared to a silicon metaloxide

semiconductor field effect transistor (MOSFET) solution.

The internal smart bootstrap switch prevents overcharging of the

BOOST pin to SW pin high-side driver supplies during dead times,

protecting the gate of the top GaN FET. The LTC7891 internally

optimizes the gate driver timing on both switching edges to achieve

smart near zero dead times, significantly improving efficiency and

allowing for high frequency operation, even at high input voltages.

Alternatively, the user can adjust the dead times with external

resistors for margin or to tailor the application.

The gate drive voltage of the LTC7891 can be precisely adjusted

from 4 V to 5.5 V to optimize performance, and to allow the use of

different GaN FETs, or even logic level MOSFETs.

Note that throughout this data sheet, multifunction pins, such as

PLLIN/SPREAD, are referred to either by the entire pin name or

by a single function of the pin, for example, PLLIN, when only that

function is relevant.

FEATURES

? GaN drive technology fully optimized for GaN FETs

? Wide VIN range: 4 V to 100 V

? Wide output voltage range: 0.8 V ≤ VOUT ≤ 60 V

? No catch, clamp, or bootstrap diodes needed

? Internal smart bootstrap switches prevent overcharging of highside

driver supplies

? Internally optimized, smart near zero dead times or resistor

adjustable dead times

? Split output gate drivers for adjustable turn on and turn off driver

strengths

? Accurate adjustable driver voltage and UVLO

? Low operating IQ: 5 μA (48 VIN to 5 VOUT)

? Programmable frequency (100 kHz to 3 MHz)

? Phase lockable frequency (100 kHz to 3 MHz)

? Spread spectrum frequency modulation

? 28-lead (4 mm × 5 mm) side wettable QFN package

APPLICATIONS

? Industrial power systems

? Military avionics and medical systems

? Telecommunications power systems