D5116AN9CXGRK中文資料金士頓數(shù)據(jù)手冊PDF規(guī)格書

Kingston on-board DDR4 DRAM is designed to meet the needs of embedded

applications and offers a high speed option with lower power consumption.

KEY FEATURES

? Double-data-rate architecture: two data transfers per clock cycle

? The high-speed data transfer is realized by the 8 bits prefetch pipelined

architecture

? Bi-directional differential data strobe (DQS and /DQS) is transmitted/received

with data for capturing data at the receiver

? DQS is edge-aligned with data for READs; center- aligned with data for WRITEs

? Differential clock inputs (CK_t and CK_c)

? DLL aligns DQ and DQS transitions with CK transitions

? Data mask (DM) write data-in at the both rising and falling edges of the

data strobe

? Write Cycle Redundancy Code (CRC) is supported

? Programmable preamble for read and write is supported

? Programmable burst length 4/8 with both nibble sequential and interleave mode

? BL switch on the fly

? Driver strength selected by MRS

? Dynamic On Die Termination supported

? Two Termination States such as RTT_PARK and RTT_NOM switchable by ODT pin

? Asynchronous RESET pin supported

? ZQ calibration supported

? Write Levelization supported

? This product in compliance with the RoHS directive

? Internal Vref DQ level generation is available

? TCAR (Temperature Controlled Auto Refresh) mode is supported.

? LP ASR (Low Power Auto Self Refresh) mode is supported

? Command Address (CA) Parity (command/address) mode is supported

? Per DRAM Addressability (PDA)

? Fine granularity refresh is supported

? Geardown Mode(1/2 rate, 1/4 rate) is supported

? Self Refresh Abort is supported

? Maximum power saving mode is supported

? Banks Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks

in the same or different bank group accesses are available

? DMI pin support for write data masking and DBIdc functionality