D1064中文資料GMI數據手冊PDF規格書

General Description:

The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Converter D1064S

acts as a galvanically isolated interface installed between a PLC/DCS in Safe Area and

a load cell (or group of load cells) in Hazardous Area. Up to four 350 Ω load cells,

or five 450 Ω load cells, or ten 1000 Ω load cells can be connected in parallel.

It provides a fully floating power supply voltage with remote sensing capabilities to

load cells located in Hazardous Area and converts the mV signal from the load cell into

a 0/4-20 mA or 0/1-5 V or 0/2-10 V signal according to user desired range.

Output circuit provides both current source and sink capabilities.

Modbus output is also provided to interface PLC/DCS using digital communication.

Features:

SIL 2 according to IEC 61508:2010 (Route 2H) with

Tproof= 2 / 10 years (≤10 / >10 of total SIF)

for 4-20 mA current source (or sink) output.

SC2: Systematic Capability SIL2.

Input from Zone 0 (Zone 20), Division 1,

installation in Zone 2, Division 2.

Strain Gauge Bridge Isolated Converter.

Up to four 350 Ω load cells in parallel or

up to five 450 Ω load cells in parallel or

up to ten 1000 Ω load cells in parallel.

0/4-20 mA, 0/1-5 V, 0/2-10 V Output Signal.

Modbus Output.

Field Automatic Calibration.

Three port isolation, Input/Output/Supply.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1

Fully programmable operating parameters.

ATEX, IECEx, FM & FM-C, INMETRO, EAC-EX, UKR TR n.

898, TüV Certifications.

Type Approval Certificate DNV and KR for

maritime applications.

High Reliability, SMD components.

Simplified installation using standard

DIN Rail and plug-in terminal blocks.

250 Vrms (Um) max. voltage allowed to the

instruments associated with the barrier.