CS8129集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

CS8129屬于集成電路（IC）的線性+開關穩壓器。由安森美半導體公司制造生產的CS8129穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

The CS8129 is a precision 5.0 V linear regulator capable of sourcing 750 mA. The RESET threshold voltage has been lowered to 4.2 V so that the regulator can be used with 4.0 V microprocessors. The lower RESET threshold also permits operation under low battery conditions (5.5 V plus a diode). The RESET’s delay time is externally programmed using a discrete RC network. During powerup, or when the output goes out of regulation, RESET remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1.0 V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition.

Features

? 5.0 V ±3.0 Regulated Output

? Low Dropout Voltage (0.6 V @ 0.5 A)

? 750 mA Output Current Capability

? Reduced RESET Threshold for Use with 4.0 V Microprocessors

? Externally Programmed RESET Delay

? Fault Protection

? Reverse Battery

? 60 V, ?50 V Peak Transient Voltage

? Short Circuit

? Thermal Shutdown

? Pb?Free Packages are Available*