CS4124集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器規格書PDF中文資料

CS4124屬于集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器。由安森美半導體公司制造生產的CS4124DC-DC 開關控制器PMIC（電源管理集成電路）DC 到 DC 開關式控制器是用于高效率電路的穩壓 IC，其配置為生成高于（突升或步升）或低于（突降或步降）輸入電源的輸出電源電壓。其他拓?fù)浣Y(jié)構可能包括：降壓-升壓、反激、正激、Cuk、SEPIC、全橋、半橋和推挽式。這些器件不同于需要最小電壓并“燒盡”多余電壓的線性穩壓器。

The CS4124 is a monolithic integrated circuit designed primarily to control the rotor speed of permanent magnet, direct current (DC) brush motors. It drives the gate of an N channel power MOSFET or IGBT with a user–adjustable, fixed frequency, variable duty cycle, pulse width modulated (PWM) signal. The CS4124 can also be used to control other loads such as incandescent bulbs and solenoids. Inductive current from the motor or solenoid is recirculated through an external diode.

The CS4124 accepts a DC level input signal of 0 to 5.0 V to control the pulse width of the output signal. This signal can be generated by a potentiometer referenced to the on–chip 5.0 V linear regulator, or a filtered 0 to 100 PWM signal also referenced to the 5.0 V regulator.

The IC is placed in a sleep state by pulling the CTL lead below 0.5 V. In this mode everything on the chip is shutdown except for the on–chip regulator and the overall current draw is less than 275 μA. There are a number of on–chip diagnostics that look for potential failure modes and can disable the external power MOSFET.

Features

? 150 mA Peak PWM Gate Drive Output

? Patented Voltage Compensation Circuit

? 100 Duty Cycle Capability

? 5.0 V, ± 3.0 Linear Regulator

? Low Current Sleep Mode

? Overvoltage Protection

? Boost Mode Power Supply

? Output Inhibit