首頁>CH7513A-BF>規格書詳情
CH7513A-BF中文資料Chrontel數據手冊PDF規格書
CH7513A-BF規格書詳情
FEATURES GENERAL DESCRIPTION
? Supports DisplayPort (DP) Specification version 1.3
and Embedded DisplayPort (eDP) Specification version
1.4.
? Support 2 Main Link Lanes at either 1.62Gb/s or
2.7Gb/s link rate
? Supports input color depth 6, 8-bit per pixel in RGB
format
? Supports Enhanced Framing Mode
? Support VESA and CEA timing standards up to
1920x1200 resolution in 8-bit input with 60Hz refresh
rate
? Support dynamic refresh rate switching
? Fast and full Link Training for embedded DisplayPort
system
? Support eDP Authentication: Alternative Scramble Seed
Reset and Alternative Framing
? 2 Lane DP/eDP bypass supported with high speed
buffer/switch integrated, pass through AUX CH/HPD in
eDP / DP bypass application
? 2 work modes: connect 27MHz crystal, inject 27MHz
clock
? De-SSC supported
? High-speed Mux integrated to support DP/eDP output
pin-multiplexed with LVDS output
? Programmable LCD panel power sequence
? Support 18-bit Single Port, 18-bit Dual Port, 24-bit
Single Port and 24-bit Dual Port LVDS output interface
? Support both OpenLDI and SPWG bit mapping for
LVDS application
? Support panel select by GPIO pins control or writing
the chip registers.
? Support flexible LVDS output pin swapping for top or
bottom mount PCBs
? Support internal test pattern
? Blank panel during invalid input
? Supports PWM Backlight luminance level control
through AUX channel, PWM pin and BLUP/BLDN pin
? Support Dynamic Backlight Control
? Hot Plug Detection
? Aux switch integrated
? Loads Boot ROM automatically upon power up
? Serial BOOT ROM data updated through I2C bus or
AUX Channel
? Support power management mechanism through AUX
? Offered in a 68-pin QFN package
Chrontel’s CH7513A is a low-cost, low-power semiconductor
device that translates the Embedded DisplayPort signal to the
LVDS (Low-voltage Differential Signaling). This innovative
DisplayPort receiver with an integrated LVDS transmitter is
specially designed to target the All-In-One PC and the notebook
market segments. Through the CH7513A’s advanced decoding /
encoding algorithm, the input DP/eDP high-speed serialized
video data can be seamlessly converted to LVDS, a popular
display technology for high-speed serial links in mid/large-sized
LCD displays. Leveraging the DP/eDP’s unique source/sink
“Link Training” routine, the CH7513A is capable of instantly
bring up the video display to the LCD when the initialization
process is completed between CH7513A and the graphic chip.
The CH7513A is designed to meet the DisplayPort (DP)
Specification version 1.3 and the Embedded DisplayPort
Specification version 1.4. In the device’s receiver block, which
supports two DP/eDP Main Link Lanes input with data rate
running at either 1.62Gb/s or 2.7Gb/s, can accept RGB digital
formats in either 18-bit 6:6:6 or 24-bit 8:8:8 for LVDS output up
to 1920x1200. To comply with GPU’s new power saving
scheme such as display frame rate reduction, the CH7513A is
equipped with the Dynamic Refresh Rate switching method,
which can automatically reduce to the low refresh rate supported
by the LVDS panel.
The integrated LVDS transmitter supports the single port and
the dual ports LVDS outputs to drive display resolution up to
WUXGA (1920x1200). CH7513A supports panel select by
GPIO[0:3] pins control or writing the chip registers. To reduce
EMI emission, the CH7513A’s LVDS encoder block has
incorporated Spread Spectrum control and its spread percentage
can be adjusted through the internal registers.
The Backlight On/Off and the PWM are two luminance control
functions designed in the CH7513A LVDS power control
module. The brightness control commands sent through AUX
Channel can be dynamically translated by CH7513A and
converted into LCD backlight control signal. The CH7513A will
save the last setting of brightness level into the BOOT ROM and
restore it upon power up. The CH7513A can dynamically adjust
backlight brigntness according to video stream to save power
consumption and it supports OSD display in this way.
The CH7513A will immediately convert the DP/eDP signal to
LVDS output after DP/eDP Link Training is completed. This
feature can be achieved by loading the panel’s EDID and the
CH7513A’s configuration settings in the serial BOOT ROM
connected to the CH7513A. During system power-up and upon
completion of the DP/eDP Link Training through AUX
Channel, CH7513A will generate LVDS signal according to the
panel power-up timing sequencing stored in the BOOT ROM.
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
CHRONTE |
24+ |
QFN40 |
10000 |
一級代理保證進口原裝正品現貨假一罰十價格合理 |
詢價 | ||
CHRONTE |
22+ |
QFN40 |
5623 |
只做原裝正品現貨!或訂貨假一賠十! |
詢價 | ||
CHRONTEL原包 |
24+ |
QFN-40 |
5000 |
全新原裝正品,現貨銷售 |
詢價 | ||
CHRONTEL/昆泰 |
20+ |
QFN40 |
2450 |
全新原裝 |
詢價 | ||
CHRONTE |
21+ |
13880 |
公司只售原裝,支持實單 |
詢價 | |||
CHRONTEL |
23+ |
QFN40 |
13859 |
市場最低 原裝現貨 假一罰百 可開原型號 |
詢價 | ||
CHRONTEL |
23+ |
TQFP128 |
5000 |
專注配單,只做原裝進口現貨 |
詢價 | ||
CHRONTEL |
1636+ |
TQFP100 |
222 |
一級代理,專注軍工、汽車、醫療、工業、新能源、電力 |
詢價 | ||
CHRONTE |
2020+ |
QFN40 |
80000 |
只做自己庫存,全新原裝進口正品假一賠百,可開13%增 |
詢價 | ||
CHRONTEL |
23+ |
QFP |
3000 |
一級代理原廠VIP渠道,專注軍工、汽車、醫療、工業、 |
詢價 |