Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R,with the following specific requirements based on room temperature (25°C) parameters:

· Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to the ± 15 over that range.

· Insulating Resistance (IR) measured after 2 minutes at rated voltage @25°C: Limit is 500 megohm microfarads or 10,000MW, whichever of the two is smaller.

· Capacitance and Dissipation Factor (DF) are measured under the following conditions:

1kHz and 1 Vrms if capacitance * 10μF

120Hz and 0.5 Vrms if capacitance $ 10μF

· DF limits:

50 -200 Volts ü 2.5

16 -25 Volts ü 3.5

6.3 / 10 Volts ü 5.0

Soldering Process

All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. The recommended mounting techniques are as follows:

· 0402 / 1210 case sizes ü Solder Reflow

· 0603 / 0805 / 1206 case sizes ü Solder Wave / Solder Reflow

C1210C475M9RAC屬于電容器 > 陶瓷電容器?；拦局圃焐a(chǎn)的C1210C475M9RAC陶瓷電容器電容器是存儲電荷的無源電子器件。陶瓷電容器包括兩個或更多個交替的陶瓷材料層（作為電介質(zhì)）和金屬層（用作非極化電極）。應(yīng)用范圍包括汽車、旁路、去耦、濾波、射頻、ESD 保護(hù)。通孔版本通常為圓片或液滴形狀，帶有兩條引線。