ATXMEGA384C3中文資料愛特梅爾數據手冊PDF規格書

Overview

The Atmel AVR XMEGA is a family of low power, high performance, and peripheral rich 8/16-bit microcontrollers based on the AVR enhanced RISC architecture. By executing instructions in a single clock cycle, the AVR XMEGA devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the system designer to optimize power consumption versus processing speed.

Features

● High-performance, low-power Atmel? AVR? XMEGA? 8/16-bit Microcontroller

● Nonvolatile program and data memories

● 384KBytes of in-system self-programmable flash

● 8KBytes boot section

● 4KBytes EEPROM

● 32KBytes internal SRAM

● Peripheral features

● Two -channel DMA controller

● Four-channel event system

● Five 16-bit timer/counters

● Four timer/counters with four output compare or input capture channels

● One timer/counter with two output compare or input capture channels

● High resolution extension on two timer/counters

● Advanced waveform extension (AWeX) on one timer/counter

● One USB device interface

● USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant

● 32 Endpoints with full configuration flexibility

● Three USARTs with IrDA support for one USART

● Two two-wire interfaces with dual address match (I2C and SMBus compatible)

● Two serial peripheral interfaces (SPIs)

● AES crypto engine

● CRC-16 (CRC-CCITT) and CRC-32 (IEEE?802.3) generator

● 16-bit real time counter (RTC) with separate oscillator

● One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter

● Two Analog Comparators with window compare function, and current sources

● External interrupts on all general purpose I/O pins

● Programmable watchdog timer with separate on-chip ultra low power oscillator

● QTouch? library support

● Capacitive touch buttons, sliders and wheels

● Special microcontroller features

● Power-on reset and programmable brown-out detection

● Internal and external clock options with PLL and prescaler

● Programmable multilevel interrupt controller

● Five sleep modes

● Programming and debug interface

● PDI (program and debug interface)

● I/O and packages

● 50 programmable I/O pins

● 64-lead TQFP

● 64-pad QFN

● Operating voltage

● 1.6 – 3.6V

● Operating frequency

● 0 – 12MHz from 1.6V

● 0 – 32MHz from 2.7V