APL5910中文資料茂達電子數據手冊PDF規格書

General Description

The APL5910 is a 1A ultra low dropout linear regulator. The IC needs two supply voltages, one is the control voltage (VCNTL) for the control circuitry, the other is the main supply voltage (VIN) for power conversion, to reduce power dissipation and provide extremely low dropout voltage.

The APL5910 integrates many functions. A Power-On-Reset (POR) circuit monitors both supply voltages on VCNTL and VIN pins to prevent erroneous operations. The functions of thermal shutdown and current-limit protect the device against thermal and current over-loads. A POK indicates that the output voltage status with a delay time set internally. It can control other converter for power sequence. The APL5910 can be enabled by other power systems. Pulling and holding the EN voltage below 0.4V shuts off the output.

The APL5910 is available in a SOP-8P package which features small size as SOP-8 and an Exposed Pad to reduce the junction-to-case resistance to extend power range of applications.

Features

? Ultra Low Dropout

- 0.12V (Typical) at 1A Output Current

? 0.8V Reference Voltage

? High Output Accuracy

- ±1.5 over Line, Load, and Temperature Range

? Fast Transient Response

? Adjustable Output Voltage

? Power-On-Reset Monitoring on Both VCNTL and VIN Pins

? Internal Soft-Start

? Current-Limit and Short Current-Limit Protections

? Thermal Shutdown with Hysteresis

? Open-Drain VOUT Voltage Indicator (POK)

? Low Shutdown Quiescent Current (< 30mA )

? Shutdown/Enable Control Function

? Simple SOP-8P Package with Exposed Pad

? Lead Free and Green Devices Available (RoHS Compliant)

Applications

? Motherboards, VGA Cards

? Notebook PCs

? Add-in Cards