GENERAL DESCRIPTION

The ADV7174/ADV7179 is an integrated digital video encoder that converts digital CCIR-601 4:2:2 8-bit component video data into a standard analog baseband television signal compatible with worldwide standards.

FEATURES

ITU-R1 BT601/BT656 YCrCb to PAL/NTSC video encoder

High quality 10-bit video DACs

SSAF? (super sub-alias filter)

Advanced power management features

CGMS (copy generation management system)

WSS (wide screen signaling)

NTSC M, PAL N2, PAL B/D/G/H/I, PAL-M3, PAL 60

Single 27 MHz clock required (×2 oversampling)

Macrovision 7.1 (ADV7174 only)

80 dB video SNR

32-bit direct digital synthesizer for color subcarrier

Multistandard video output support:

Composite (CVBS)

Component S-video (Y/C)

Video input data port supports:

CCIR-656 4:2:2 8-bit parallel input format

Programmable simultaneous composite and S-video or RGB

(SCART)/YPbPr video outputs

Programmable luma filters low-pass [PAL/NTSC] notch,

extended SSAF, CIF, and QCIF

Programmable chroma filters (low-pass [0.65 MHz, 1.0 MHz,

1.2 MHz, and 2.0 MHz], CIF, and QCIF)

Programmable VBI (vertical blanking interval)

Programmable subcarrier frequency and phase

Programmable LUMA delay

Individual on/off control of each DAC

CCIR and square pixel operation

Integrated subcarrier locking to external video source

Color signal control/burst signal control

Interlaced/noninterlaced operation

Complete on-chip video timing generator

Programmable multimode master/slave operation

Closed captioning support

Teletext insertion port (PAL-WST)

On-board color bar generation

On-board voltage reference

2-wire serial MPU interface (I2C? compatible and fast I2C)

Single-supply 2.8 V and 3.3 V operation

Small 40-lead 6 mm × 6 mm LFCSP package

?40°C to +85°C at 3.3 V

?20°C to +85°C at 2.8 V

APPLICATIONS

Portable video applications

Mobile phones

Digital still cameras

ADV7174KCP屬于集成電路（IC） > 編碼器，解碼器，轉換器。亞德諾半導體技術有限公司制造生產的ADV7174KCP編碼器，解碼器，轉換器該系列產品可用于將信息封裝或編碼為適合于傳輸或存儲的格式，和/或在通信路徑的另一端執行逆運算，通常是通過使用某些形式的調制過程。示例包括從數字?jǐn)?shù)據生成模擬視頻信號的器件（反之亦然）；基于傳輸目的對按鈕的狀態進行編碼的器件（實現遠程控制功能）；以及便于將標準 UART 連接到標準紅外收發器的器件。