ADUM6202中文資料亞德諾數(shù)據(jù)手冊(cè)PDF規(guī)格書

GENERAL DESCRIPTION

The ADuM6200/ADuM6201/ADuM62021 are dual-channel digital isolators with isoPower?, an integrated, isolated dc-to-dc

converter. Based on the Analog Devices, Inc., iCoupler? technology, the dc-to-dc converter provides up to 400 mW of regulated, iso-

lated power at either 5.0 V or 3.3 V from a 5.0 V input supply, or at 3.3 V from a 3.3 V supply at the power levels shown in Table 1.

These devices eliminate the need for a separate, isolated dc-to-dc

converter in low power, isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for

the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution. The ADuM6200/ADuM6201/ADuM6202 isolators provide two

independent isolation channels in a variety of channel configura-

tions and data rates (see the Ordering Guide for more information). isoPower uses high frequency switching elements to transfer power

through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the

AN-0971 Application Note for board layout recommendations.

FEATURES isoPower integrated, isolated dc-to-dc converter Regulated 5 V or 3.3 V output Up to 400 mW output power

Dual dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC wide body package version

16-lead SOIC wide body enhanced creepage version

High temperature operation: 105°C maximum

Safety and regulatory approvals

UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 250 V rms, 8 mm package (RI-16-1) IEC 60950-1: 400 V rms, 8 mm package (RI-16-1) VDE certificate of conformity (RW-16) IEC 60747-5-2 (VDE 0884 Part 2):2003-01 VIORM = 846 V peak VDE certificate of conformity, 8 mm package (RI-16-1) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12

VIORM = 846 V peak

APPLICATIONS

RS-232/RS-422/RS-485 transceivers Industrial field bus isolation

Isolated sensor interfaces

Industrial PLCs