ADM8830ARU集成電路（IC）的特殊用途穩壓器規格書PDF中文資料

ADM8830ARU屬于集成電路（IC）的特殊用途穩壓器。由亞德諾半導體技術有限公司制造生產的ADM8830ARU特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。

GENERAL DESCRIPTION

The ADM8830 is a charge pump regulator used for color thin film transistor (TFT) liquid crystal displays (LCDs). Using charge pump technology, the device can be used to generate three output voltages (+5.1 V ± 2, +15.3 V, –10.2 V) from a single 3 V input supply. These outputs are then used to provide supplies for the LCD controller (5.1 V) and the gate drives for the transistors in the panel (+15.3 V and –10.2 V). Only a few external capacitors are needed for the charge pumps. An efficient low dropout voltage regulator also ensures that the power efficiency is high and provides a low ripple 5.1 V output. This LDO can be shut down and an external LDO used to regulate the 5 V doubler output and drive the input to the charge pump section, which generates the +15.3 V and –10.2 V outputs if so required by the user.

FEATURES

3 Output Voltages (+5.1 V, +15.3 V, –10.2 V) from

One 3 V Input Supply

Power Efficiency Optimized for Use with TFT in

Mobile Phones

Low Quiescent Current

Low Shutdown Current (<1 μA)

Fast Transient Response

Shutdown Function

Power Saving during Blanking Period

Option to Use External LDO

APPLICATIONS

Handheld Instruments

TFT LCD Panels

Cellular Phones