ADM483EAR-REEL集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM483EAR-REEL屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM483EAR-REEL驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up to 32 transceivers on a bus.

The ADM483E has a low current shutdown mode in which it consumes only 0.1 μA.

Because only one driver is enabled at any time, the output of a disabled or power-down driver is three-stated to avoid overloading the bus.

Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if the input is open circuit.

The ADM483E is fully specified over the industrial temperature ranges and is available in 8-lead SOIC_N packages.

FEATURES

±15 kV ESD protection

250 kbps data rate

Reduced slew rate for low EM interference

Single 5 V ± 10 supply

?7 V to +12 V bus common-mode range

Up to 32 nodes on the bus

Receiver open-circuit, fail-safe design

Short-circuit protection

36 μA supply current

0.1 μA shutdown current

APPLICATIONS

Low power RS-485 systems

Electrically harsh environments

EMI sensitive applications

DTE-DCE interface

Packet switching

Local area networks