ADGM1003BCCZRF/IF射頻/中頻RFID的射頻開關規格書PDF中文資料

ADGM1003BCCZ屬于RF/IF射頻/中頻RFID的射頻開關。由亞德諾半導體技術有限公司制造生產的ADGM1003BCCZ射頻開關射頻開關產品是用于在多個可用信號路徑之間路由 RF、IF 或微波信號的器件。示例應用包括多天線（分集）接收器中的天線選擇、多模式系統中發射-接收路徑的選擇，或在發射和接收信號鏈之間切換天線。

GENERAL DESCRIPTION

The ADGM1001 is a wideband, single-pole, two-throw (SP2T)

switch, fabricated using Analog Devices, Inc., micro-electromechanical

system (MEMS) switch technology. This technology enables a

small form factor, wide RF bandwidth, highly linear, low insertion

loss switch that is operational down to 0 Hz/dc, making it an ideal

solution for a wide range of RF and precision equipment switching

needs. The device is packaged in a 24-lead, 5.00 mm × 4.00 mm ×

0.90 mm, land grid array (LGA) package.

An integrated control chip generates the high voltage necessary to

electrostatically actuate the switch via a complementary metal-oxide

semiconductor (CMOS)-/low voltage transistor-transistor logic

(LVTTL)-compatible parallel interface. All switches are independently

controllable.

Multifunction pin names may be referenced by their relevant function only.

FEATURES

? ADGM1001: DC to 34 GHz

? ADGM1002: DC to 20 GHz

? ADGM1003: DC to 16 GHz

? Insertion loss (ADGM1001)

? 0.8 dB (typical) at 18 GHz

? 1.5 dB (typical) at 34 GHz

? IIP3: 76 dBm (typical) (ADGM1001)

? Maximum RF power: 33 dBm (ADGM1001)

? On resistance: 3.4 Ω (typical)

? Maximum dc current: 200 mA (ADGM1001)

? Actuation lifetime: 100 million cycles (minimum)

? On switching time (tON): 200 μs (typical)

? Integrated 3.3 V driver for simple control with parallel and SPI

? Independently controllable switches

? Space-saving integrated passive components

? Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package

? Temperature range: –40°C to +85°C

APPLICATIONS

? ATE load and probe boards

? DC and high speed loop back testing

? Relay replacements

? Reconfigurable filters and attenuators

? Military and microwave radios

? Cellular infrastructure: 5G mmWave

? Supports digital standards: PCIe Gen4/Gen5/Gen6, USB 3 and USB 4, and PAM 4