ADG611中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADG611/ADG612/ADG613 are monolithic CMOS devices containing four independently selectable switches. These switches offer ultralow charge injection of 1 pC over the full input signal range and typical leakage currents of 10 pA at 25°C.

The devices are fully specified for ±5 V, +5 V, and +3 V supplies. Each contains four independent single-pole, single-throw (SPST) switches. The ADG611 and ADG612 differ only in that the digital control logic is inverted. The ADG611 switches are turned on with a logic low on the appropriate control input, whereas a logic high is required to turn on the switches of the ADG612. The ADG613 contains two switches with digital control logic similar to that of the ADG611 and two switches in which the logic is inverted.

Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG613 exhibits break-before-make switching action. The ADG611/ADG612/ADG613 are available in a small, 16-lead TSSOP package, and the ADG611 is also available in a 16-lead SOIC package.

FEATURES

1 pC charge injection

±2.7 V to ±5.5 V dual-supply operation

+2.7 V to +5.5 V single-supply operation

Automotive temperature range: ?40°C to +125°C

100 pA maximum at 25°C leakage currents

85 Ω on resistance

Rail-to-rail switching operation

Fast switching times

16-lead TSSOP and SOIC packages

Typical power consumption: <0.1 μW

TTL-/CMOS-compatible inputs

APPLICATIONS

Automatic test equipment

Data acquisition systems

Battery-powered systems

Communications systems

Sample-and-hold systems

Audio signal routing

Relay replacement

Avionics