ADG1534中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADG1534 contains four independent SPDT switches. An EN

input on the ADG1534 is used to enable or disable the device.

When disabled, all channels are high impedance. The digital inputs,

INx, are 1.8 V logic-compatible and suitable for low voltage logic

controls.

The ADG1534 is fully specified at VDD = +5 V ± 10 and VSS

= ?4.5 V to ?8.8 V for applications that require asymmetrical

supplies. The ultra-low on resistance and on-resistance flatness of

the switches makes it an ideal solution for data acquisition and

gain switching applications, where low distortion is critical. The

construction ensures ultra-low power dissipation, making the device

ideally-suited for portable and battery-powered instruments.

The switch conducts equally well in both directions when on and

has an input signal range that extends to the supplies. In the off

condition, signal levels up to the supplies are blocked. All channels

exhibit a break-before-make switching action that prevents momentary

shorting when switching channels.

FEATURES

? 4.5 Ω typical on resistance for +5 V to ?8 V supply at 25°C

? 1.2 Ω on-resistance flatness for +5 V to ?8 V supply at 25°C

? Up to 346 mA continuous current

? Fully specified

? VDD = +5 V ± 10

? VSS = ?4.5 V to ?8.8 V

? No VL supply required

? 1.8 V logic-compatible inputs

? Rail-to-rail operation

? 20-lead, 4 mm × 4 mm LFCSP

APPLICATIONS

? LDMOS power amplifier gate drive

? GaN power amplifier gate drive

? Communication systems

? Automatic test equipment

? Data acquisition systems

? Sample-and-hold systems