ADE7762ARW-RL中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADE77621 is a high accuracy polyphase electrical energy measurement IC. The ADE7762 specifications surpass the accuracy requirements as quoted in the IEC62053-21 standard.

The only analog circuitry used in the ADE7762 is in the analog-to-digital converters (ADCs) and reference circuit. All other signal processing (for example, multiplication, filtering, and summation) is carried out in the digital domain. This approach provides superior stability and accuracy over extremes in environmental conditions and over time.

FEATURES

High accuracy supports 50 Hz/60 Hz IEC62053-21

Less than 0.1 error over a dynamic range of 500 to 1

Compatible with 3-phase 3-wire delta and 3-phase 4-wire Wye

configurations

Supplies average active power on the frequency outputs F1 and F2

High frequency output (CF) is intended for calibration and

supplies instantaneous active power

Logic output REVP indicates a potential miswiring or negative

power on the sum of all phases

Dropout indication for each phase on LED driver pins

Phase sequence error detection

Direct drive for electromechanical counters and 2-phase stepper

motors (F1 and F2)

Proprietary ADCs and DSP provide high accuracy over large

variations in environmental conditions and time

On-chip power supply monitoring

On-chip creep protection (no load threshold)

On-chip reference 2.4 V ± 8 (25 ppm/°C typical) with external

overdrive capability

Single 5 V supply, low power (TBD mW typical)

Low cost CMOS process