ADAS1000-3集成電路（IC）的模擬前端（AFE）規格書PDF中文資料

ADAS1000-3屬于集成電路（IC）的模擬前端（AFE）。由亞德諾半導體技術有限公司制造生產的ADAS1000-3模擬前端（AFE）模擬前端 (AFE) 是一種用于信號調節的半導體器件，由模擬放大器、運算放大器、濾波器和集成電路構成。這種可配置功能塊能連接各種傳感器。分辨率范圍從 8 位至 42 位不等，通道數范圍為 1 至 256 個。

GENERAL DESCRIPTION

The ADAS1000/ADAS1000-1/ADAS1000-2 measure electro cardiac (ECG) signals, thoracic impedance, pacing artifacts, and lead-on/lead-off status and output this information in the form of a data frame supplying either lead/vector or electrode data at programmable data rates. Its low power and small size make it suitable for portable, battery-powered applications. The high performance also makes it suitable for higher end diagnostic machines.

FEATURES

Biopotential signals in; digitized signals out

5 acquisition (ECG) channels and one driven lead

Parallel ICs for up to 10+ electrode measurements Master ADAS1000 or ADAS1000-1 used with slave ADAS1000-2

AC and dc lead-off detection

Internal pace detection algorithm on 3 leads Support for user’s own pace

Thoracic impedance measurement (internal/external path)

Selectable reference lead

Scalable noise vs. power control, power-down modes

Low power operation from 11 mW (1 lead), 15 mW (3 leads), 21 mW (all electrodes)

Lead or electrode data available

Supports AAMI EC11:1991/(R)2001/(R)2007, AAMI EC38 R2007, EC13:2002/(R)2007, IEC60601-1 ed. 3.0 b:2005, IEC60601-2-25 ed. 2.0 :2011, IEC60601-2-27 ed. 2.0 b:2005, IEC60601-2-51 ed. 1.0 b: 2005

Fast overload recovery

Low or high speed data output rates

Serial interface SPI-/QSPI?-/DSP-compatible

56-lead LFCSP package (9 mm × 9 mm)

64-lead LQFP package (10 mm × 10 mm body size)

APPLICATIONS

ECG: monitor and diagnostic Bedside patient monitoring, portable telemetry, Holter, AED, cardiac defibrillators, ambulatory monitors, pace maker programmer, patient transport, stress testing