AD7942BRM集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7942BRM屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7942BRM模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7942 is a 14-bit, charge redistribution, successive approximation PulSAR? ADC that operates from a single power supply, VDD, between 2.3 V to 5.5 V. It contains a low power, high speed, 14-bit sampling ADC with no missing codes, an internal conversion clock, and a versatile serial interface port. The part also contains a low noise, wide bandwidth, short aperture delay track-and-hold circuit. On the CNV rising edge, it samples an analog input, IN+, between 0 V to VREF with respect to a ground sense, IN?. The reference voltage, VREF, is applied externally and is set up to be the supply voltage. Its power scales linearly with the throughput.

FEATURES

14-bit resolution with no missing codes

Throughput: 250 kSPS

INL: ±0.4 LSB typical, ±1 LSB maximum (±0.0061 of FSR)

SINAD: 85 dB @ 20 kHz

THD: ?100 dB @ 20 kHz

Pseudo differential analog input range

0 V to VREF with VREF up to VDD

No pipeline delay

Single-supply 2.3 V to 5.5 V operation with

1.8 V/2.5 V/3 V/5 V logic interface

Serial interface SPI-/QSPI-/MICROWIRE-/

DSP-compatible

Daisy-chaining for multiple ADCs and busy indicator

Power dissipation

1.25 mW @ 2.5 V/100 kSPS, 3.6 mW @ 5 V/100 kSPS

1.25 μW @ 2.5 V/100 SPS

Standby current: 1 nA

10-lead package: MSOP and 3 mm × 3 mm QFN (LFCSP)

Pin-for-pin compatible with the 16-bit AD7685

APPLICATIONS

Battery-powered equipment

Data acquisition

Instrumentation

Medical instruments

Process controls