AD7793B集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7793B屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7793B模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7792/AD7793 are low power, low noise, complete analog front ends for high precision measurement applications. The AD7792/AD7793 contain a low noise 16-/24-bit ∑-Δ ADC with three differential analog inputs. The on-chip, low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC. With a gain setting of 64, the rms noise is 40 nV when the update rate equals 4.17 Hz.

FEATURES

Up to 23 bits effective resolution

RMS noise

40 nV @ 4.17 Hz

85 nV @ 16.7 Hz

Current: 400 μA typical

Power-down: 1 μA maximum

Low noise programmable gain instrumentation amp

Band gap reference with 4 ppm/°C drift typical

Update rate: 4.17 Hz to 470 Hz

3 differential inputs

Internal clock oscillator

Simultaneous 50 Hz/60 Hz rejection

Programmable current sources

On-chip bias voltage generator

Burnout currents

Power supply: 2.7 V to 5.25 V

–40°C to +105°C temperature range

Independent interface power supply

16-lead TSSOP package

Interface

3-wire serial

SPI?, QSPI?, MICROWIRE?, and DSP compatible

Schmitt trigger on SCLK

APPLICATIONS

Thermocouple measurements

RTD measurements

Thermistor measurements

Gas analysis

Industrial process control

Instrumentation

Portable instrumentation

Blood analysis

Smart transmitters

Liquid/gas chromatography

6-digit DVM