AD7707BRU集成電路（IC）的模數轉換器（ADC）規格書PDF中文資料

AD7707BRU屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7707BRU模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7707 is a complete analog front end for low frequency measurement applications. This three-channel device can accept either low level input signals directly from a transducer or high level (±10 V) signals and produce a serial digital output. It employs a sigma-delta conversion technique to realize up to

16 bits of no missing codes performance. The selected input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via an on-chip control register allowing adjustment of the filter cutoff and output update rate.

FEATURES

Charge Balancing ADC

16 Bits No Missing Codes

0.003 Nonlinearity

High Level (610 V) and Low Level (610 mV) Input Channels

True Bipolar 6100 mV Capability on Low Level Input Channels Without Requiring Charge Pumps

Programmable Gain Front End Gains from 1 to 128

Three-Wire Serial Interface

SPI?, QSPI?, MICROWIRE? and DSP Compatible

Schmitt Trigger Input on SCLK

Ability to Buffer the Analog Input

2.7 V to 3.3 V or 4.75 V to 5.25 V Operation

Power Dissipation 1 mW max @ 3? V

Standby Current 8 mA max

20-Lead SOIC and TSSOP Packages