AD7687集成電路（IC）的模數轉換器（ADC）規(guī)格書PDF中文資料

AD7687屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7687模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7694 is a 16-bit, charge redistribution, successive approximation, PulSAR analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.7 V to 5.25 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes (B grade), an internal conversion clock, and a serial, SPI-compatible interface port. The part also contains a low noise, wide bandwidth, short aperture delay track-and-hold circuit. On the CNV rising edge, it samples an analog input, IN+, between 0 V to REF with respect to a ground sense, IN?. The reference voltage, REF, is applied externally and can be set up to the supply voltage.

FEATURES

16-bit resolution with no missing codes

Throughput: 250 kSPS at 5 V

INL: ±4 LSB max

S/(N + D): 92 dB at 20 kHz

THD: –106 dB at 20 kHz

Pseudo-differential analog input range:

0 V to VREF with VREF up to VDD

No pipeline delay

Single-supply operation: 2.7 V or 5 V

Proprietary serial interface

SPI?-/QSPI?-/MICROWIRE?-/DSP-compatible1

Supply Current: 540 μA at 2.7 V/100 kSPS,

800 μA at 5 V/100 kSPS

Standby current: 1 nA

8-lead MSOP package

Improved second source to LTC1864 and LTC1864L

APPLICATIONS

Battery-powered equipment

Data acquisition

Instrumentation

Medical instruments

Process control