ACT-5231PC-133F22Q中文資料AEROFLEX數據手冊PDF規(guī)格書

DESCRIPTION

The ACT5231 is a highly integrated superscalar microprocessor that implements a superset of the MIPS IV Instruction Set Architecture(ISA). It has a high performance 64-bit integer unit, a high throughput, fully pipelined 64-bit floating point unit, an operating system friendly memory management unit with a 48-entry fully associative TLB, a 32KB 2-way set associative instruction cache, a 32KB 2-way set associative data cache, and an efficient 32-bit system interface. The ACT5231 can issue both an integer and a floating point instruction in the same cycle.

Features

■ Full militarized QED RM5231 microprocessor

■ Pinout compatible with popular RM5230 with split power sup plies (2.5V and 3.3V)

■ Dual Issue superscalar microprocessor - can issue one integer and one floating-point instruction per cycle

● 133, 150 and 200 MHz operating frequencies – Consult Factory for latest speeds

● 325 Dhrystone2.1 MIPS

● SPECInt95 5.0, SPECfp95 5.25

■ System interface optimized for embedded applications

● 32-bit system interface lowers total system cost

● High performance write protocols maximize uncached write bandwidth with 600 MB per second peak throughput

● Operates at processor clock divisors 2, 2.5, 3, 3.5,4, 4.5, 5, 6, 7, 8, 9

● IEEE 1149.1 JTAG boundary scan

■ Integrated on-chip caches

● 32KB instruction and 32KB data - 2 way set associative and per set locking

● Virtually indexed, physically tagged

● Write-back and write-through on per page basis

● Pipeline restart on first double for data cache misses

■ Integrated memory management unit

● Fully associative joint TLB (shared by I and D translations)

● 48 dual entries map 96 pages

● Variable page size (4KB to 16MB in 4x increments)

■ High-performance floating point unit

● 532 MFLOPS single-precision performance

● Single cycle repeat rate for common single precision opera-tions and some double precision operations

● Two cycle repeat rate for double precision multiply and double precision combined multiply-add operations

● Single cycle repeat rate for single precision combined multiplyadd operation

■ MIPS IV instruction set

● Floating point multiply-add instruction increases performance in signal processing and graphics applications

● Conditional moves to reduce branch frequency

● Index address modes (register + register)

■ Embedded application enhancements

● Specialized DSP integer Multiply-Accumulate instruction and 3 operand multiply instruction

● I and D cache locking by set

● Optional dedicated exception vector for interrupts

■ Fully static CMOS design with power down logic

● Standby reduced power mode with WAIT instruction

● 2.7 W typical power @ 200MHz

● 2.5V core with 3.3V IO’s

■ 128-pin Power Quad-4 package (F22), Consult Factory for package configuration