Description

The A5366 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to be interconnected so that if any unit senses smoke all units will sound an alarm. Special features are incorporated in the design to facilitate calibration and testing of the finished detector. The device is recognized by Underwriters Laboratories for use in smoke alarms that comply with Standard UL217, or UL268, per file #S2113.

Features and Benefits

? Low average standby current for long battery life

? Interconnect up to 50 detectors

? Piezoelectric horn driver

? Low battery detection (all internal)

? Chamber sensitivity test and alarm

? Power-on reset (POR)

? Internal timer and control for reduced sensitivity mode

? Built-in circuits to reduce false triggering

? 6 to 12 V operating range

? ESD protection circuitry on all pins

? Temporal Horn Pattern, per UL217, NFPA72, and ISO8201

? UL Recognized for UL217 or UL268 applications

A5366CA屬于集成電路（IC） > 傳感器和檢測器接口。Allegro MicroSystems制造生產的A5366CA傳感器和檢測器接口該系列產品可執行信號調節、數據轉換、激勵生成和/或各種將傳感器或變送器機構連接到主機設備所需的其他功能。示例包括用于 CCD 圖像傳感器的控制器、用于 4-20 mA 接口和類似應用的電流變送器、超聲變送器前端、惠斯通電橋接口等。