首頁>74LVC377D>規格書詳情

74LVC377D集成電路（IC）的觸發器規格書PDF中文資料

廠商型號	74LVC377D
參數屬性	74LVC377D 封裝/外殼為20-SOIC（0.295"，7.50mm 寬）；包裝為卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶；類別為集成電路（IC）的觸發器；產品描述：IC FF D-TYPE SNGL 8BIT 20SO
功能描述	Octal D-type flip-flop with data enable; positive-edge trigger
封裝外殼	20-SOIC（0.295"，7.50mm 寬）
文件大小	236.19 Kbytes
頁面數量	12 頁
生產廠商	Nexperia B.V. All rights reserved
企業簡稱	NEXPERIA【安世】
中文名稱	安世半導體(中國)有限公司官網
原廠標識
數據手冊	下載地址一下載地址二到原廠下載
更新時間	2025-1-15 18:26:00

1. General description

The 74LVC377 is an octal positive-edge triggered D-type flip-flop. The device features clock

(CP) and data enable (E) inputs. When E is LOW, the outputs Qn will assume the state of their

corresponding D inputs that meet the set-up and hold time requirements on the LOW-to-HIGH

clock (CP) transition. Input E must be stable one set-up time prior to the LOW-to-HIGH transition

for predictable operation. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows

the use of these devices as translators in mixed 3.3 V and 5 V environments.

2. Features and benefits

? Wide supply voltage range from 1.2 V to 3.6 V

? Overvoltage tolerant inputs to 5.5 V

? CMOS low power consumption

? Direct interface with TTL levels

? Output drive capability 50 Ω transmission lines at 125 °C

? Complies with JEDEC standard:

? JESD8-7A (1.65 V to 1.95 V)

? JESD8-5A (2.3 V to 2.7 V)

? JESD8-C/JESD36 (2.7 V to 3.6 V)

? ESD protection:

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-B exceeds 200 V

? CDM JESD22-C101E exceeds 1000 V

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C