1. General description

The 74HC373-Q100; 74HCT373-Q100 is an octal D-type transparent latch with 3-state outputs.

The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at

the inputs enter the latches. In this condition the latches are transparent, a latch output will change

each time its corresponding D-input changes. When LE is LOW the latches store the information

that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH

on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does

not affect the state of the latches. Inputs include clamp diodes. This enables the use of current

limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

? Wide supply voltage range from 2.0 V to 6.0 V

? CMOS low power dissipation

? High noise immunity

? Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

? Complies with JEDEC standards:

? JESD8C (2.7 V to 3.6 V)

? JESD7A (2.0 V to 6.0 V)

? Input levels:

? For 74HC373-Q100: CMOS level

? For 74HCT373-Q100: TTL level

? 3-state non-inverting outputs for bus-oriented applications

? Common 3-state output enable input

? ESD protection:

? MIL-STD-883, method 3015 exceeds 2000 V

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

? Multiple package options

? DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints

74HCT373D-Q100屬于集成電路（IC） > 鎖存器。安世半導體(中國)有限公司制造生產的74HCT373D-Q100鎖存器鎖存器是類似于觸發器的基本數字存儲設備，但是不同之處在于，在鎖存使能（或類似命名）信號處于有效邏輯狀態的任何時間，保持的邏輯狀態都可以改變?！巴该鳌辨i存器還允許設備輸出在鎖存使能信號有效時反映輸入的當前狀態，而相反的是，狀態僅在保持狀態已固定時改變。