1. General description

The 74AVC2T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation.

It features two data input-output ports (nA and nB), a direction control input (DIR) and dual-supply

pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V

and 3.6 V making the device suitable for translating between any of the low voltage nodes

(0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins nA and DIR are referenced to VCC(A) and pins nB

are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR

allows transmission from nB to nA.

The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing any damaging backflow current through the device when it is

powered down. In Suspend mode when either VCC(A) or VCC(B) are at GND level, both A and B are

in the high-impedance OFF-state.

2. Features and benefits

? Wide supply voltage range:

? VCC(A): 0.8 V to 3.6 V

? VCC(B): 0.8 V to 3.6 V

? High noise immunity

? Complies with JEDEC standards:

? JESD8-12 (0.8 V to 1.3 V)

? JESD8-11 (0.9 V to 1.65 V)

? JESD8-7 (1.2 V to 1.95 V)

? JESD8-5 (1.8 V to 2.7 V)

? JESD8-B (2.7 V to 3.6 V)

? ESD protection:

? HBM JESD22-A114F Class 3B exceeds 8000 V

? MM JESD22-A115-A exceeds 200 V

? CDM JESD22-C101C exceeds 1000 V

? Maximum data rates:

? 500 Mbit/s (1.8 V to 3.3 V translation)

? 320 Mbit/s (<1.8 V to 3.3 V translation)

? 320 Mbit/s (translate to 2.5 V or 1.8 V)

? 280 Mbit/s (translate to 1.5 V)

? 240 Mbit/s (translate to 1.2 V)

? Suspend mode

? Latch-up performance exceeds 100 mA per JESD 78 Class II

? Inputs accept voltages up to 3.6 V

? Low noise overshoot and undershoot < 10 of VCC

? IOFF circuitry provides partial Power-down mode operation

? Multiple package options

? Specified from -40 °C to +85 °C and -40 °C to +125 °C

74AVC2T45屬于集成電路（IC） > 轉換器，電平移位器。安世半導體(中國)有限公司制造生產的74AVC2T45轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。