5L2503-000NVGI8集成電路（IC）的時鐘發(fā)生器PLL頻率合成器規(guī)格書PDF中文資料

Description

The 5L2503 MicroClock programmable clock generator is

intended for low-power, consumer, wearable and smart devices.

The 5L2503 device is a 3 PLL architecture design. Each PLL is

individually programmable, allowing up to 3 unique frequency

outputs. The 5L2503 has built-in unique features such as

Proactive Power Saving (PPS) to deliver better system level

power management.

An internal OTP memory allows the user to store the configuration

in the device without programming after power-up, and then can

be reprogrammed again through the I2C interface.

The device has programmable VCO and PLL source selection

allowing the user to do power-performance optimization based on

the application requirements. A low-power 32.768kHz clock is

supported with only less than 2μA current consumption for system

RTC reference clock needs.

Features

? Configurable OE1 pin function as OE, PPS or DFC control

function

? Proactive Power Saving (PPS) features save power during the

end device power down mode

? Dynamic Frequency Control (DFC) feature allows programming

up to 4 difference frequencies switch dynamically

? Spread spectrum clock support to lower system EMI

? I2C Interface

Output Features

? 3 LVCMOS outputs: 1MHz–125MHz

? Low Power 32.768kHz clock supported

? Wireless clock crystal integration and fan out directly

Key Specifications

? 2μA operation for RTC clock 32.768kHz output

? 2.5 × 2.5 mm 12-DFN small form factor package