24C16中文資料仙童半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

General Description

The NM24C16/17 devices are 16,384 bits of CMOS non-volatile electrically erasable memory. These devices conform to all specifications in the Standard IIC 2-wire protocol and are designed to minimize device pin count, and simplify PC board layout requirements.

The upper half (upper 8Kbit) of the memory of the NM24C17 can be write protected by connecting the WP pin to VCC. This section of memory then becomes unalterable unless WP is switched to VSS.

Features

■ Extended operating voltage 2.7V – 5.5V

■ 400 KHz clock frequency (F) at 2.7V - 5.5V

■ 200μA active current typical

10μA standby current typical

1μA standby current typical (L)

0.1μA standby current typical (LZ)

■ IIC compatible interface

– Provides bi-directional data transfer protocol

■ Schmitt trigger inputs

■ Sixteen byte page write mode

– Minimizes total write time per byte

■ Self timed write cycle

Typical write cycle time of 6ms

■ Hardware Write Protect for upper half (NM24C17 only)

■ Endurance: 1,000,000 data changes

■ Data retention greater than 40 years

■ Packages available: 8-pin DIP, 8-pin SO, and 8-pin TSSOP

■ Available in three temperature ranges

- Commercial: 0° to +70°C

- Extended (E): -40° to +85C

- Automotive (V): -40° to +125°C