0916589中文資料菲尼克斯電氣數(shù)據(jù)手冊(cè)PDF規(guī)格書

Description

The ECP… electronic circuit breaker, which has a design

width of just 12.5 mm, selectively protects all 24 V DC load

circuits. This is achieved using a combination of active

electronic current limitation and proven circuit breaker

technology including electrical isolation. The ECP… can be

plugged onto the proven TMCP SOCKET M base, which

ensures quick and easy mounting.

The ECP… can be used in applications that cover all

aspects of the switched-mode power supply unit. In the

event of an overload, switched-mode power supply units

reduce the output voltage, which means that all the

connected loads are no longer sufficiently supplied. This

means that if an error occurs in one load of a system, the

voltage will be affected in all load circuits.

The ECP… solves this problem by always limiting the

maximum possible current to 1.8 times (or 1.5 times) the

value of the set nominal current. Capacitive loads can thus

be switched on and loads are only switched off in the event

of an overload or short circuit.

An LED and integrated signal contacts indicate the

operating and error states.