AD590IH中文資料Intersil數(shù)據(jù)手冊PDF規(guī)格書

Description

The AD590 is an integrated-circuit temperature transducer

which produces an output current proportional to absolute temperature. The device acts as a high impedance constant current

regulator, passing 1μA/oK for supply voltages between +4V and

+30V. Laser trimming of the chip's thin film resistors is used to

calibrate the device to 298.2μA output at 298.2oK (25oC).

The AD590 should be used in any temperature-sensing

application between -55oC to 150oC in which conventional

electrical temperature sensors are currently employed. The

inherent low cost of a monolithic integrated circuit combined

with the elimination of support circuitry makes the AD590 an

attractive alternative for many temperature measurement situations. Linearization circuitry, precision voltage amplifiers,

resistance measuring circuitry and cold junction compensation are not needed in applying the AD590. In the simplest

application, a resistor, a power source and any voltmeter can

be used to measure temperature.

In addition to temperature measurement, applications include

temperature compensation or correction of discrete

components, and biasing proportional to absolute temperature.

The AD590 is particularly useful in remote sensing applications. The device is insensitive to voltage drops over long

lines due to its high-impedance current output. Any well

insulated twisted pair is sufficient for operation hundreds of

feet from the receiving circuitry. The output characteristics

also make the AD590 easy to multiplex: the current can be

switched by a CMOS multiplexer or the supply voltage can

be switched by a logic gate output.

Features

? Linear Current Output . . . . . . . . . . . . . . . . . . . . 1μA/oK

? Wide Temperature Range . . . . . . . . . . . -55oC to 150oC

? Two-Terminal Device Voltage In/Current Out

? Wide Power Supply Range . . . . . . . . . . . . . +4V to +30V

? Sensor Isolation From Case

? Low Cost